To Next Page

To Previous Page

Table of Contents

TDS5000B Series Service Manual

List of Table s

Table 2--1: Additional accessory connection information 2--2.........

Table 5--1: Calibration required for module replaced 5--1...........

Table 5--2: Required equipment and materials 5--2.................

Table 5--3: GPIB devices required by test program 5--5.............

Table 5--4: CALibrate commands 5--7............................

Table 5--5: DIAgnostic Commands 5--19............................

Table 6--1: External inspection check list 6--3......................

Table 6--2: Internal inspection check list 6--4......................

Table 6--3: Tools required for module removal 6--8.................

Table 6--4: Failure symptoms and possible causes 6--51...............

Table 6--5: Power supply voltages 6--56............................

Table 6--6: Acquisition board voltages 6--56........................

Table 6--7: Power-on diagnostic tests 6--58.........................

Table 6--8: Action required for module replaced 6--61................

Table 6--9: BIOS Error messages 6--62............................

Table 6--10: Beep codes (SNB030000 and above) 6--64................

Table 6--11: Beep codes (SN B010100 to B029999) 6--64..............

Table 7--1: Instrument options 7--1...............................

Table 7--2: Instrument upgrades 7--2.............................

Table 7--3: Standard accessories 7--3.............................

Table 7--4: Optional accessories 7--4..............................

Tektronix TDS5000B Series Read This First

Other manuals for Tektronix TDS5000B Series