Compliance Information
CAUTION. Caution statements identify conditions or practices that could result in
damage to this
product or other property.
Symbols and Terms on the
Product
These terms may appear on the product:
DANGER i ndicates an injury hazard immediatel y accessible as you read
the marking.
WAR NI NG in di ca tes a n i nj ur y ha zar d n ot i mm ed ia te ly a cc es sible a s y ou
read the marking.
CAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
Compliance Information
This section lists the EMC (electromagnetic compliance), safety, and
environmental standards with which the instrument complies. This EMC section
replaces the Certifications and Compliances section in Table 1–11, of the
TDS5000B Series Technical Reference manual (071-1420-xx).
EMC Compliance
EC Declaration of
Conformity – EMC
Meets intent of Directive 2004/108/EC for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the
Official Journal of the European Com
munities:
EN 61326-1:2006, EN 61326-2-1:2006. EMC requirements for electrical equipment
for measurement, control, and laboratory use.
1234
CISPR 11:2003. Radiated and conducted emissions, Group 1, Class A
IEC 61000-4-2:2001. Electrostatic discharge immunity
IEC 61000-4-3:2002. RF electromagnetic field immunity
5
IEC 61000-4-4:2004. Electrical fast transient/burst immunity
IEC 61000-4-5:2001. Power line surge immunity
IEC 61000-4-6:2003. Conducted RF immunity
5
IEC 61000-4-11:2004. Voltage dips and interruptions immunity
6
2 TDS5000B Read This First
To Next Page
Loading...
Need help?
General
