Tektronix TDS5000B Series Read This First

Compliance Information
EN 61000-3-2:2
006. AC power line h armonic emissions
EN 61000-3-3:1995. Vo l t a g e c h a n g e s , fluctuations, and flicker
European Contact.
Tektronix UK, Ltd.
Western Pen
insula
Western Road
Bracknell, RG12 1RF
United Kingdom
1
This product is intended for use in nonresidential areas only. Use in residential areas may cause electromagnetic
interference.
2
Emissions which exceed the levels required by this standard may occur when this equipment is connected to a
test object.
3
To ens ure c omp liance with the E MC stand ard s listed here , hig h qualit y shi elded in terf ace cables shoul d be u sed.
4
Instrument rebooting may be experienced where the EUT takes longer than 10 seconds to recover from IEC
61000-4-11 transient immunity test.
5
Under these conditions, the specifications are amended as follows: 1 mV/division to 1 V/division: < 0.2 division
waveform displacement or < 0.4 division increase in peak -to peak noise for (IEC 61000-4-3 and IEC 61000-4-6
tests)
6
Performance Criterion C applied at the 70%/25 cycle Voltage-Dip and the 0%/250 cycle Voltage-Interruption test
levels (IEC 61000-4-11).
Australia / New Zealand
Declaration of
Conform
ity – EMC
Complies with the EMC provision of theRadiocommunicationsActperthe
following standard, in accordance with ACMA:
CISPR 11:2003. Radiated and Conducted Emissions, Group 1, Class A, in
accordance with EN 61326-1:2006 and EN 61326-2-1:2006.
TDS5000B Read This First 3

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English