TELEDYNE API T300M - EPA Designation; Approvals and Certifications; Safety; Emc

083730300A DCN8101 Introduction, Specifications, Approvals, & Compliance 17
1.2 EPA DESIGNATION
Teledyne API’s Model T300, Gas Filter Correlation Carbon Monoxide Analyzer, is
designated as a US EPA Reference Method, Designation Number RFCA-1093-093 for
CO measurement. The official “List of Designated Reference and Equivalent Methods” is
published in the U.S. Federal Register: http://www3.epa.gov/ttn/amtic/criteria.html
, and
specifies the instrument’s settings and configurations.
Note
EPA designation does not apply to the T300M model.
1.3 APPROVALS AND CERTIFICATIONS
The Teledyne API Model T300/T300M analyzer was tested and certified for Safety and
Electromagnetic Compatibility (EMC). This Section presents the compliance statements
for those requirements and directives.
1.3.1 SAFETY
IEC/EN 61010-1:2010 (3
rd
Edition), Safety requirements for electrical equipment for
measurement, control, and laboratory use.
CE: 2006/95/EC, Low-Voltage Directive
1.3.2 EMC
EN 61326-1 (IEC 61326-1), Class A Emissions/Industrial Immunity
FCC 47 CFR Part 15B, Class A Emissions
CE: 2004/108/EC, Electromagnetic Compatibility Directive
1.3.3 OTHER TYPE CERTIFICATIONS
EN 15267 – Ambient Air Measurement for CO
EN 14626 – Air Quality – Ambient Air Automated Measuring Systems
Sira MC 050069/07
For additional certifications, please contactTechnical Support.