TERSUS Oscar - Mode Configuration

User Manual for Oscar GNSS Receiver v2.4
48
Battery
Shows battery percentage.
 Mode
The current working mode of the receiver is displayed.
Home Screen
Display
Description
Mode
Single
The receiver is in Single mode.
Base
The receiver is in Base mode.
Rover
The receiver is in Rover mode.
 Mode Configuration
Press the power button to enter the next level of display interface.
Home screen
Level 1
Level 2
Level 3
Mode Config
Base Mode
TCS
(Tersus Caster Service)
Set Format: RTCMv2.3/
RTCMv3/ RTCMv3.2/ RTD/
CMR
Check Device ID
Set Server
Ntrip Server
Set Format: RTCMv2.3/
RTCMv3 / RTCMv3.2/ RTD/
CMR
Check historical IP address &
Port
Internal Radio
Set Protocol: TRANSEOT/
TT450/ SOUTH/ SATEL/
TRIMMK3
Set Air-Baud-Rate: 9600/
19200/ 4800
Set Format: RTCMv2.3/
RTCMv3 / RTCMv3.2/ RTD/
CMR