System Control and Status Register
SysCtrlRegs.SCSR (lab file: Watchdog.c)
WD Override (protect bit)
Protects WD from being disabled
0 = WDDIS bit in WDCR has no effect (WD cannot be disabled)
1 = WDDIS bit in WDCR can disable the watchdog
• This bit is a clear-only bit (write 1 to clear)
• The reset default of this bit is a 1
01215 - 3
WDOVERRIDE
WDENINTWDINTS
reserved
WD Enable InterruptWD Interrupt Status
(read only)
0 = active
1 = not active
0 = WD generates a MCU reset
1 = WD generates a WDINT interrupt
To Next Page
Loading...
