Topcon HiPer Lite - Page 60

Configuration
Topcon HiPer Lite and HiPer Lite+ Operator’s Manual
2-24
3. Click ConfigurationReceiver (Figure 2-23).
Figure 2-23. Configure Receiver
4. Click the MINTER tab, set the following parameters and click
Apply (Figure 2-24 on page 2-24). See the following pages for
descriptions of these parameters:
• Recording interval on page 2-25
• Elevation mask for log file on page 2-25
• File name prefix on page 2-25
• Always append to the file on page 2-25
• Files Creation mode on page 2-26
• Automatic File Rotation Mode (AFRM) on page 2-26
• FN key mode on page 2-27
• Initial data collection dynamic mode on page 2-28
• Data recording auto-start on page 2-28
Figure 2-24. Receiver Configuration – MINTER Tab