Configuration
Topcon HiPer Lite and HiPer Lite+ Operator’s Manual
2-38
TIP
TIP
To maintain unique Bluetooth module settings for
different purposes, keep copies of BTCONF in separate
folders.
To uninstall, or remove, BTCONF, delete any applicable BTCONF
directories or folders, and any BTCONF shortcuts.
Once you have BTCONF available, follow these steps to configure
the Bluetooth module.
1. Using the RS232 cable, connect the serial port of your
computer (usually COM1) to the receiver’s serial port A.
2. Press the power buttons on the receiver and computer to turn
them on.
3. Run the Bluetooth module configuration program (Btconf.exe)
(Figure 2-32).
Figure 2-32. Bluetooth Module Configuration Main Screen
Notice that the lower left corner shows a “Disconnected” status
for the computer and Bluetooth module.
For BTCONF version and copyright information, click the
About button.
To Next Page
Loading...
