Multi Pro 1750 Page 7 − 47 Drive Train
C. Insert steel balls and springs into the grooves.
1
2
3
1. Spindle
2. Spring (2)
3. Ball (2)
Figure 87
D. Apply silicone sealant to mating surface of fork
shaft case.
E. Install fork shaft case. Install and tighten flange
head screws to a torque from 18 to 22 ft−lb (25 to 29
N−m).
F. Check operation of shifters and detent.
1
3
2
2
2
1. Flange head screw (1)
2. Flange head screw (3)
3. Fork shaft case
Figure 88
18 to 22 ft−lb
(25 to 29 N−m)
26.Apply moly disulfide grease to washer and insert
washer into housing of transaxle case.
1
1. Washer
Figure 89
Drive Train
To Next Page
Loading...
