Multi Pro 1750Page 7 − 48Drive Train
27.Install differential gear assembly together with differ-
ential lock fork shaft onto transaxle case.
Figure 90
1
2
1. Differential gear assy. 2. Fork shaft
Figure 91
28.Install side cover:
A. Insert dowel pins onto transaxle case.
B. Apply multi−purpose grease on lip of oil seal and
install new differential lock shaft oil seal in side cover.
C. Apply silicone sealant onto mating surface of side
cover.
D. Install side cover and secure with ten (10) flange
head screws. Torque screws from 18 to 22 ft−lb
(25 to 29 N−m).
Figure 92
18 to 22 ft−lb
(25 to 29 N−m)
1
2
1. Flange head screw (10) 2. Differential lock shaft
oil seal
To Next Page
Loading...
