e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 52
[ 5 ] End fence home position sensor (S73) / Standby side empty sensor (S74) / End
fence stop position sensor (S75)
(2) Remove 2 screws and take off the tray-up
unit.
Fig. 4-147
(3) Disconnect 1 connector, release the latch
and take off the tandem LCF bottom sensor.
Fig. 4-148
(1) Remove 1 screw and take off the plate cover.
Fig. 4-149
Tray-up unit
Tandem LCF bottom sensor
Plate coverEnd fence
To Next Page
Loading...
