E6582062
3-7 3. [Basic operation] Operation panel and screen display
3
9
10
(4) [Monitor mode]
• You can check the status such as the operation status of the inverter and terminal information.
The following are the top screen of each mode and how to switch between them.
When switching with the [F1] - [F4] keys
Direction of rotation
Output frequency
Output current
Input voltage(DC detection)
Output voltage
Screen Copy Setting Monitor
Hz
0.0HzSTOP
0.0HzSTOP
0.0
17:12
17:13
Forward
0.0Hz
0%
116%
0%
1. History function
2. Direct access
3. Guidance function
4. Basic parameters
5. Extended parameters(F - - -)
0.0HzSTOP
17:13
CMOd : Run command select
FMOd : Freq command select 1
ACC : Acceleration time 1
dEC : Deceleration time 1
UL : Upper limit frequency
0.0HzSTOP
17:13
1
10
10.0s
10.0s
Setting Mode
Monitor Mode
Standard Mode
Easy Mode
60.0Hz
Top Easy Monitor Top Setting
Setting
Monitor
Top
Easy
[Standard mode]
[Monitor mode]
[Setting mode] [Easy mode]
F3
F1
F1
F1
F2
F4
F2
F4
F3
F3
F4
To Next Page
Loading...
