E6582062
6-119 6. [Advanced] How to use parameters
3
4
6
9
Set the protection functions against electric thermal, current stall prevention operation, input/output phase
failure, short circuit, ground fault, overtorque, undervoltage, analog signal disconnection, etc. for safety
operation.
6. 30. 1 Setting the motor electronic thermal protection
<F606: Motor overload reduction frequency threshold>
<F607: Motor overload time>
<F631: Inverter overload detection>
<F632: Electronic thermal memory target>
<F657: Overload alarm level>
For details on the motor electronic thermal functions, refer to [5. 2. 5].
6. 30 Setting the protection functions
To Next Page
Loading...
