Toshiba TOSVERT VF-AS3 User Manual

E6582062
6. [Advanced] How to use parameters 6-12
4
4
6
9
6. 3. 1 Always enabling the input terminal functions
(always ON)
<F110: Always active function 1>
<F127: Always active function 2>
<F128: Always active function 3>
■ Function
These parameters select an input terminal function to be always enabled (always ON). You can set
three points.
■ Parameter setting
6. 3 Selecting terminal functions
Title Parameter name Adjustment range Default setting
F110 Always active function 1
0-177
*1
*1 For details on the input terminal functions, refer to [7. 2. 1].
6
F127 Always active function 2 0
F128 Always active function 3 0
6: Standby
7: 6(Invers)
8: Reset 1
9: 8(Invers)
10: Preset speed switching 1
0.0HzSTOP
12:47
F110 : Always active function 1

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m