Toshiba TOSVERT VF-AS3 User Manual

E6582062
10. Selection and installation of peripheral devices 10-14
9
10
This inverter is equipped with two option slots (A, B) as standard. The option adapter (option) can be
mounted for an extended slot.
10. 4. 1 Insert type options and functions
Cassette options are available as shown in the next table.
■ Cassette options
10. 4 Insert type options
Name Specification Type-form Slot availability Remarks
I/O extension 1 6x digital input
2x digital output
2x analog input
ETB013Z A, B, C Refer to
E6582128
I/O extension 2 3x 1a relay ETB014Z A, B ,C Refer to
E6582129
Digital encoder RS422 Line receiver VEC008Z B Refer to
E6582140
and
E6582148
Resolver Resolver VEC010Z B Coming soon
Safety module SS1, SS2, SOS, SBC, SMS, SLS,
SDI, SSM
SFT001Z C Coming soon
PROFINET PROFINET interface PNE001Z A
EtherCAT EtherCAT interface IPE003Z A Coming soon
PROFIBUS-DP PROFIBUS-DP interface PDP003Z A
DeveceNet DeviceNet interface DEV003Z A
CANopen CANopen interface RJ45
D-sub
Open style
CAN001Z
CAN002Z
CAN003Z
A Coming soon

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m