2-1 2. Installation and wiring
I
II
III
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
This chapter explains installation of the inverter, how to remove the covers, how to wire to the power
supply and the motor, connection of the control circuit, and functions of terminals and connectors for
communication.
2
Installation and wiring
WARNING
Disassembly
prohibited
• Never disassemble, modify or repair.
This can result in electric shock, fire and other injury. Please call your Toshiba distributor for
repairs.
Prohibited
• Do not stick your fingers into openings such as cable wiring holes and cooling fan covers.
The unit contains high voltage parts and contact with them will result in electric shock.
• Do not place or insert any kind of object (electrical wire cuttings, rods, wires etc.) inside the
inverter.
This will cause a short circuit and result in electric shock or fire.
• Do not allow water or any other fluids to come in contact with the inverter.
This will cause a short circuit and result in electric shock or fire.
CAUTION
Prohibited
• For transporting or carrying the inverter, do not hold by the front cover.
The cover will come off and the unit will drop, resulting in injury.
Mandatory
action
• Carry the inverter by two people or more when the inverter is the model mass 20kg or more
(VFAS3-2110P - 2370P, VFAS3-4220PC - 4750PC).
If you carry the inverter alone, this will result in injury.
To Next Page
Loading...
Need help?
General