Toshiba TOSVERT VF-AS3 User Manual

11-1 11. Table of parameters
I
II
III
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
*1 Parameter values vary depending on the capacity. For details, refer to [11. 6].
*2 Depending on the setup menu. Refer to [11. 10].
*3 For details on the analog output and monitor output function, refer to [11. 7].
*4 Refer to section [11. 8] for details about the input terminal function.
*5 Refer to section [11. 9] for details about the output terminal function.
*6 Y: Writable N: Not writable
11
Table of parameters
11. 1 Frequency setting parameter
Title Parameter name
Adjustment
range
Unit
Minimum setting unit
(Panel/Communication)
Default
setting
Write
during
running
*6
User
setting
Reference
FC Panel run frequency LL - UL Hz 0.1/0.01 0.0 Y [4. 3. 1]

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m