E6582062
2. Installation and wiring 2-2
2
9
Take special care with the installation environment of the inverter. Install the inverter in a location that
secures space for ventilation and heat emitting (in the cabinet, etc.), considering heat generation and
occurrence of noise.
2. 1. 1 Installation environment
This inverter is an electronic control instrument. Take full consideration to install it in the proper operating
environment as follows.
(1) Do not install in any location of high tempera-
ture, high humidity, moisture condensation
and freezing and avoid locations where there
is exposure to water and/or where there may
be large amounts of dust, metallic fragments
and oil mist.
2. 1 Installation
WARNING
Prohibited
• Do not place any inflammable object near the inverter.
If flame is emitted due to failure in the inverter, this will lead to fire.
• Do not install the inverter in any location where the inverter could come into contact with water
or other fluids.
This will result in electric shock or fire.
Mandatory
action
• Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions will result in failure.
CAUTION
Prohibited
• Do not install the inverter in any place with large vibration.
The unit will fall due to the vibration, resulting in injury.
To Next Page
Loading...
Need help?
General
