Toshiba TOSVERT VF-S11 User Manual

E6581158
D-8
4
Q How to use the history function
Key operated LED display Operation

Displays the operation frequency (operation stopped).
(When standard monitor display selection H= [Operation
frequency])
CWJ
The first basic parameter “CWJ” (history function) is displayed.
CEE The parameter that was set or changed last is displayed.
 Press the ENTER key to display the set value.
 Press the key and key to change set value.
⇔CEE
Press the ENTER key to save the changed value. The parameter
name and the programmed value will flash on and off alternately.
****
Use the same steps as those given above to display parameters that
you want to search for or change setting with the key and key.
JGCF
(GPF)
JGCF: First historic record
GPF: Last historic record
Parameter
display
↓
CWJ
↓
HTH
↓

Press the MODE key to return to the parameter setting mode
“CWJ.”
After that you can press the MODE key to return to the status moni-
tor mode or the standard monitor mode (display of operation fre-
quency).
MODE
MODE
MODE
MODE

Toshiba TOSVERT VF-S11 Specifications

General

Model	TOSVERT VF-S11
Category	Inverter
Output Frequency	0.1-400Hz
Frequency Range	0.1-400Hz
Control Method	V/f Control, Sensorless Vector Control
Power Rating	0.2kW to 15kW
Cooling Method	Forced air cooling
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	Modbus RTU
Input Voltage	200-240V, 380-480V
Braking Unit	Built-in (optional external braking resistor)