Toshiba TOSVERT VF-S11 User Manual

E6581158
F-74
6
6.21 Operation panel parameter
6.21.1 Prohibition of key operations and parameter settings
H : Prohibition of change of parameter setting
H
: Prohibition of panel operation (FC)
H
: Prohibition of panel operation (RUN/STOP keys)
H
: Prohibition of panel emergency stop operation
H
: Prohibition of panel reset operation
H
: Prohibition of change of EOQF/HOQF during operation
• Function
These parameters allow you to prohibit the operation of the RUN and STOP keys on the operation
panel and the change of parameters. Using these parameters, you can also prohibit various key
operations.
[Parameter setting]
Title Function Adjustment range Default setting
H
Prohibition of change of parameter
setting
0: Permitted, 1: Prohibited
0
H
Panel operation prohibition (FC)
0: Permitted, 1: Prohibited
0
H
Prohibition of panel operation
(RUN/STOP keys)
0: Permitted, 1: Prohibited
0
H
Prohibition of panel emergency stop
operation
0: Permitted, 1: Prohibited
0
H Prohibition of panel reset operation
0: Permitted, 1: Prohibited
0
H
Prohibition of change of
EOQF/HOQF during operation
0: Permitted, 1: Prohibited
1
Q Resetting method
Only the H parameter is designed so that its setting can be modified even if 1 (prohibited) is selected.

Toshiba TOSVERT VF-S11 Specifications

General

Model	TOSVERT VF-S11
Category	Inverter
Output Frequency	0.1-400Hz
Frequency Range	0.1-400Hz
Control Method	V/f Control, Sensorless Vector Control
Power Rating	0.2kW to 15kW
Cooling Method	Forced air cooling
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	Modbus RTU
Input Voltage	200-240V, 380-480V
Braking Unit	Built-in (optional external braking resistor)