Toshiba TOSVERT VF-S11 User Manual

E6581158
F-5
6
6.2 Input signal selection
6.2.1 Priority selection (both F-CC, R-CC are ON)
H : Priority selection (both F-CC, R-CC are ON)
• Function
This parameter allows you to select the direction in which the motor runs when a forward run (F)
command and a reverse run (R) command are entered simultaneously.
1) Reverse
2) Slowdown stop
Q Parameter setting
Title Function Adjustment range Default setting
H
Priority selection (both F-CC, R-CC
are ON)
0: Reverse
1: Slowdown stop
1
[H =  (Stop)]: If an F command and an R command are entered simultaneously,
the motor will slow down to a stop.
Forward run
Reverse run
Run forward signal
Run backward signal
ON
OFF
ON
OFF
Output frequency [Hz]
Set frequency
Time[s]0

Toshiba TOSVERT VF-S11 Specifications

General

Model	TOSVERT VF-S11
Category	Inverter
Output Frequency	0.1-400Hz
Frequency Range	0.1-400Hz
Control Method	V/f Control, Sensorless Vector Control
Power Rating	0.2kW to 15kW
Cooling Method	Forced air cooling
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	Modbus RTU
Input Voltage	200-240V, 380-480V
Braking Unit	Built-in (optional external braking resistor)