Toshiba TOSVERT VF-S11 - 6.3 Terminal function selection

E6581158
F-7
6
6.3 Terminal function selection
6.3.1 Keeping an input terminal function always active (ON)
H : Always-active function selection
• Function
This parameter specifies an input terminal function that is always to be kept active (ON). (Only one
function selectable)
Q Parameter setting
Title Function Adjustment range Default setting
H
Always-active function selection 0-64 (See section 11, K-15) 1 (Standby)
6.3.2 Modifying input terminal functions
H : Input terminal selection 1 (F)
H : Input terminal selection 2 (R)
H : Input terminal selection 3 (RES)
H : Input terminal selection 4 (S1)
H : Input terminal selection 5 (S2)
H : Input terminal selection 6 (S3)
H : Input terminal selection 7 (VIB)
H : Input terminal selection 8 (VIA)