Trackmaster TMX428 - System Specifications; Interface and Operating Conditions

Specifications Ch. 2 TRACKMASTER
26 TMX428 TMX428CP & TMX58 Service Manual 317-160-406 Rev 4
May 2021
Safety Systems
 Dual comparative speed sensors
 Auto runaway shutdown
 Auto communication loss shutdown
 Manual twist lock Emergency Stop button
 Manual Stop Tether
 Braking system for safe patient offloading
 Fire rated motor pan hood enclosure
Treadmill
 Patient weight capacity 500 lb., 227 kg
 All steel construction with baked powder-coat finish
 Treadmill net weight: 425 lb., 193 kg
Drive System
 Heavy-duty 4-peak hp. brushless, DC servo motor
 110-120VAC, 1-phase, 60 Hz, 20-amp power supply (standard)
 200-240VAC, 1-phase, 50-60 Hz, 15-amp power supply (optional)
 220 VAC, Split phase, 50-60 Hz, 15-amp power supply (optional-US Configuration)
Speed Range
 0.1 to 15.0 MPH, 0.2 to 24.0 KPH, self-calibrating and adjustable in 0.1 MPH, 0.2
KPH increments.
Incline Range
 0 to 25%, .5% incremental movements, self-calibrating.
Running Surface
 22in. x 63in. 56cm x 160cm
 MasterTrack
®
running belt tracking system
 Cushioned running deck absorbs shock of foot falls
 Self-lubricated and reversible running deck
 Step up height (7 inches., 18cm from floor)
Communication Ports
 RS232 Female Serial port and USB 1.0 “B”
Floor Surface Footprint
 33in. x 78.5 in., 84cm x 200cm level surface. (See location requirements chapter 5)
Operating and Storage Condition Recommendations
 Operating Temperature Range: 4.5to +38 C (+40 +85F)
 Storage Temperature Range: -40 to +70 C (-40 to +158 F)
 Operating and Storage Relative Humidity Range: 10% - 90%, non-condensing
 Altitude: -50 to 5,280 feet
TMX428CP Programmable Control