Trackmaster TMX428 - Communication Access Location

Assembly and Setup Ch. 5 TRACKMASTER
38 TMX428 TMX428CP & TMX58 Service Manual 317-160-406 Rev 4
May 2021
Communication Access Location
The communication ports are located at the very front of the treadmill near the center of the unit.
Two ports are offered with equal communication capability. The standard “Female” RS232 port
and a new USB “B” port offer connectivity diversification. You will need to install the
appropriate USB driver software in order to communicate with the TRACKMASTER
®
treadmill.
You may download the appropriate driver based upon your computer OS at
http://www.ftdichip.com/Drivers/VCP.htm. When connecting to the USB port, ensure port
configuration is congruent with your software port identification.
Item
Description
1
RS232 Port “Female”
2
USB “B” Port
2
1