TRACKMASTER Ch. 6 Operating Instructions
317-160-406 Rev 4 TMX428 TMX428CP & TMX58 Service Manual 41
May 2021
Programmable Control Instructions TMX428CP
The TRACKMASTER
®
TMX428CP Programmable Control model is a dual purpose treadmill
capable of operating for cardiac stress testing or a VO
2
pulmonary evaluation. The display
automatically changes from a blue, full information screen (typically found on fitness treadmills),
to a black screen under controlled thru communication. All control buttons on the console are
disabled in this mode with the exception of the two stop buttons located at the lower left and
lower right of the control. The display will revert back to the full information screen upon closing
the communications.
TESTING MODE DISPLAY
The TRACKMASTER
®
TMX428CP Control model is a full-featured, stand-alone fitness
treadmill suitable for rehabilitation and general fitness applications. Additionally, it comes pre-
programmed with 10 workouts, including Pre-Programmed Protocols and Interval Fitness training
routines, in addition to 5 possible user defined workouts.
MANUAL MODE DISPLAY
To Next Page
Loading...
