EasyManua.ls Logo

Trackmaster TMX428 - Preventive Maintenance; Maintenance Schedules and Instructions

Trackmaster TMX428
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRACKMASTER Ch. 7 Parts List with Part Numbers
317-160-406 Rev 4 TMX428 TMX428CP & TMX58 Service Manual 55
May 2021
Preventive Maintenance
Regular cleaning and maintenance is essential to keep your TRACKMASTER
®
treadmill
operating at
its best for many years. We recommend that you record all maintenance and service in a log (as
shown in Appendix A Maintenance Log).
Before cleaning the device turn the main power switch to OFF, and
disconnect the treadmill from its power outlet. Never use wet cleaning
materials near a power source: you could suffer an electrical shock.
To preserve the condition of your warranty, make sure that all repair procedures
(other than normal maintenance) are performed by an authorized and qualified
service provider. Contact customer support with any questions at (316) 283-3344.
Use only TRACKMASTER
®
replacement parts. Using other parts may void your
warranty and may cause your treadmill to malfunction.
Reprocessing Instructions
To reprocess the treadmill between each patient use, follow the reprocessing instructions
located in Appendix B Reprocessing Instructions
Daily Maintenance
Ensure that the treadmill is functioning properly.
Visual inspection of treadmill and walking belt for damage and wear.
Weekly Maintenance
Vacuum around and under the treadmill. Clean all exposed surfaces with a
vacuum cleaner. Avoid moving the treadmill from its original position as moving
it will compromise the original belt tracking setting.
Check Running Belt Tension Adjustment
Observe Running Belt Tracking Adjustment correct as required.
Monthly Maintenance
Belt Cleaning and Inspection.
7

Table of Contents

Related product manuals