Power Requirements Ch. 3 TRACKMASTER
28 TMX428 TMX428CP & TMX58 Service Manual 317-160-406 Rev 4
May 2021
TRACKMASTER
®
treadmills must be grounded to reduce the risk of electrical
shock. If a malfunction occurs, grounding provides a path of least resistance for an
electric current. Ungrounded connections must not be used.
No other equipment may be used on the electrical circuit with the device. Do not use
extension cords. Using a shared or unreliable circuit can also cause the device to
unexpectedly shut off, potentially resulting in injury to the patient.
Ensure the master power switch is in the off position before plugging in the device.
A power surge could damage the sophisticated electronic system of the treadmill.
To Next Page
Loading...
