TransAct Epic Edge - ESC G - Turn Double-Strike Mode On;Off

8-Printer Commands Epic Edge™ OEM Integration Manual
Page 90 August 2018 100-14444 Rev B
ESC G – Turn Double-strike Mode On/Off
This command turns double-strike mode on or off. When the least significant bit (LSB) of
the parameter n is 0, double-strike mode is turned off. When the LSB is 1, double-strike
mode is turned on.
Expression
ASCII
ESC G <n>
Hexadecimal
1BH 47H <
n
>
Decimal
<27> <71> <
n
>
Parameters n = value ranging from 0 to 255, where:
LSB = 0 turns off double-strike mode
LSB = 1 turns on double
-
strike mode