TransAct Epic Edge - GS 0 - Print User Defined Image

8-Printer Commands Epic Edge™ OEM Integration Manual
Page 110 August 2018 100-14444 Rev B
GS 0 – Print User Defined Image
Description
Prints an image from the EEPROM memory, if found in the directory.
Note: An image must be downloaded to the printer before it can be
printed using this command. See the GS 1 Enter Download Image
mode command for details.
Expression
ASCII
[GS] 0 <n1><n2><t><name>[Null]
Hexadecimal
1DH 30 <
n1
><
n2
><
t
><
name
> 00H
Decimal
<29> <48> <
n1
><
n2
><
t
><
name
> <0>
Parameters n1 = most significant byte of left offset
n2 = least significant byte of left offset
t = offset from top
name
= image name saved in EEPROM