TransAct Epic Edge - ESC @ - Reset to Power-Up Condition

8-Printer Commands Epic Edge™ OEM Integration Manual
Page 86 August 2018 100-14444 Rev B
ESC @ – Reset to Power-up Condition
Description
Returns the printer to its power-up condition, clears all buffers, and resets all character
attributes. The ESC @ command is the same as the ESC * command.
See also
ESC * – Reset to Defaults
Expression
ASCII
[ESC] @
Hexadecimal
1BH 40H
Decimal
<27> <64>
Parameters
None