TransAct Epic Edge - ESC P - Set Font to 16 Cpi

8-Printer Commands Epic Edge™ OEM Integration Manual
100-14444 Rev B August 2018 Page 93
ESC P – Set Font to 16 cpi
Description
Changes the character size for subsequent characters to the 16 cpi mini font.
Fonts may only be changed at the beginning of a line, prior to any printable characters.
This font will remain in effect until the printer is reset (by the ESC @ or ESC * command)
or another font is selected.
See also
ESC M – Set Font to 12 cpi
ESC S – Set Font to 20 cpi
ESC U – Set Font to 10 cpi
ESC T – Set Font to 7 cpi
Expression
ASCII
[ESC] P
Hexadecimal
1BH 50H
Decimal
<27> <80>
Parameters
None
Comparison table of font sizes
Font Height
(dots)
Width
(dots)
Horizontal
cpi
Vertical cpi
ESC S
-
mini
24
10
20.0
8.4
ESC P - mini 24 12 16.9 8.4
ESC M – normal (default) 32 16 12.7 6.4
ESC U - headline 32 20 10.2 6.4
ESC T - headline 56 28 7.3 3.6