3-Mounting Requirements Epic Edge™ OEM Integration Manual
Page 24 August 2018 100-14444 Rev B
Bezel Specifications and Recommendations
Bezel to Printer Mechanism mounting points
Epic Edge™ printers are designed to accommodate a TransAct or customer-supplied
bezel assembly that is mounted following the hardware and mounting dimensions as
listed. The following drawing shows the positioning and dimensions of the Epic Edge™
printer’s mounting points.
Several bezel configurations and colors are available for the Epic Edge printer. Contact
Transact sales to determine which bezel is appropriate for your application
Front: 6x M3x 0.5 press nuts and interface with bezel.
Figure 8. Bezel Mounting and Hardware Requirements
4.430
3.662
.500
.499
.497
.337
.258
.940
1.831
2.409
2.176
TOP OF SLIDING MODULE
SIDE OF SLIDING MODULE
C OF TICKET
L
M3x0.5
PRESS NUTS
6PLS
To Next Page
Loading...
