8-Printer Commands Epic Edge™ OEM Integration Manual
Page 74 August 2018 100-14444 Rev B
FF – Form Feed
Description
This command prints the contents of the text buffer, and then advances the print media.
The form is advanced until either of the following two conditions occurs:
• The feed distance specified by the GS L command has been reached.
-or-
• A Black Dot/Top of Form indicator has been detected on the print media.
When the printer is initially powered on, the default feed distance
stored in NVRAM is used. This value has a factory default of 7.5
inches, and can be overridden by specifying a new value using the GS
L macro command.
Feed distances specified via GS L are cleared whenever the printer is powered down, or
by issuing the ESC @ or ESC * reset commands.
This command shares identical functionality with the escape command ESC E.
See also:
ESC E – Form Feed
Expression
<12>
None
To Next Page
Loading...
