TransAct Epic Edge - ESC! - Select Print Mode(S)

8-Printer Commands Epic Edge™ OEM Integration Manual
100-14444 Rev B August 2018 Page 83
ESC ! – Select Print Mode(s)
Description
Selects the font and right-side character spacing, using the convention shown below.
Expression
ASCII
[ESC] ! <n>
Hexadecimal
1BH 21H <
n
>
Decimal
<27> <33> <
n
>
Parameters <n> = value from 0-4 which selects one of the following options:
n = 0 selects the 10x24 font and sets the intercharacter
spacing for 20 CPI.
n = 1 selects the 12x24 font and sets the intercharacter
spacing for 16 CPI.
n = 2 selects the 16x32 font and sets the intercharacter
spacing for 14 CPI.
n = 3 selects the 20x32 font and sets the intercharacter
spacing for 12 CPI.
n = 4 selects the 28x56 font and sets the intercharacter
spacing for 7 CPI.