TransAct Epic Edge - GS a - Starting Position of Bar Code

8-Printer Commands Epic Edge™ OEM Integration Manual
100-14444 Rev B August 2018 Page 113
GS A – Starting Position of Bar Code
Description
This command is used to center a bar code on a text line, and defines the distance from
the left where the first bar code will print. The distance is represented in dots, where
each dot represents increments of 1/203 of an inch.
Expression
ASCII
[GS] A
n1 n2
Hexadecimal
1DH 41H
n1 n2
Decimal
<29> <65>
n1 n2
Parameters n1 = the most significant byte
n2 = the least significant byte
Number of dots = Inches/203 = (n1 * 256) + n2
Starting position of bar code
Length (in inches)
Number of Dots
n1
N2
0.5
102
0
102
1.0 203 0 203
2.0
406
1
150
3.0 609 2 97