8-Printer Commands Epic Edge™ OEM Integration Manual
100-14444 Rev B August 2018 Page 99
ESC X – Set Horizontal Starting Position
Description
This command is used in landscape printing to set a new offset from the left margin from
which to begin printing text and bar code objects. Distance is specified in units of 1/203
inch).
The n1 and n2 parameters are evaluated to form a 16-bit word as follows: first, the n1
parameter’s decimal value is multiplied by 256, then the result is added to the decimal
value of the n2 parameter.
Expression
1BH 58H n1 n2
<27> <88> n1 n2
Parameters n1 = high-order byte of 16-bit word that specifies distance
bit word that specifies distance
To Next Page
Loading...
