TransAct Printrex 980 - Page 210

Appendix B: Frequently Asked Questions
Page 200 100-11672 - Rev D
Code
Detail Code
Item
Description
14: Printhead Type Error
14
01-FF
(Additional
value of
K:01,C:02,
M:04,Y:08)
(MODULE1),
(Additional
value of
K:10,C:20,
M:40,Y:80)
(MODULE2)
Condition
Detected
Correct Printhead is not installed
Action
Install correct Printhead.
15: Ink Leaking
15
01
Condition
Detected
Ink is leaking
Action
Locate ink leakage and replace Unit in
question.
17: Purge Unit End of Life
17
01
Condition
Detected
Purge Unit life
Action
Replace Purge Unit.
18: Blade Cleaner End of Life
18
01
Condition
Detected
Blade Cleaner life
Action
Replace Blade Cleaner
19: Printhead Temperature Sensor Error
19
01-FF
(Additional
value of
K:01,C:02,
M:04,Y:08)
(MODULE1),
(Additional
value of
K:10,C:20,
M:40,Y:80)
(MODULE2)
Condition
Detected
Printhead Temperature Sensor is damaged
Action
1. Replace Printheads.
2. Replace Flexible Cable.
3. Replace Printhead Relay PCB.
4. Replace Printer Controller PCB.
1B: Printhead Flexible Cable Connection Error
1B
01-FF
(Additional
value of
K:01,C:02,
M:04,Y:08)
(MODULE1),
(Additional
value of
K:10,C:20,
Condition
Detected
Printhead Flexible Cable is not connected
correctly
Action
1. Check Printhead Flexible Cable connection.
2. Replace Printheads.
3. Replace Printhead Relay PCB.
4. Replace Printer Controller PCB.