TransAct Printrex 980 - Page 212

Appendix B: Frequently Asked Questions
Page 202 100-11672 - Rev D
Code
Detail Code
Item
Description
24
01
Condition
Detected
Climate Sensor is not connected.
Action
1. Check Climate Sensor connection.
2. Replace Climate Sensor.
3. Replace Printer Controller PCB.
25: Paper Suction Fan Error
25
01
Condition
Detected
Paper Suction Fan is faulty or not connected.
Action
1. Check for a clogged fan.
2. Check Suction Fan connector connection.
3. Replace Suction Fan.
4. Replace Printer Controller PCB.
26: Power Supply Fan Error
26
01
Condition
Detected
Power Supply Fan is faulty or not connected
Action
1. Check for a clogged fan.
2. Check Power Supply Fan connector
connection.
3. Replace Power Supply Fan.
4. Replace Printer Controller PCB.
26
02
Condition
Detected
Power Supply Fan is faulty or not connected
Action
1. Check for a clogged fan.
2. Check Power Supply Fan connector
connection.
3. Replace Power Supply Fan.
4. Replace Printer Controller PCB.
27: Cooling Fan Error
27
01
Condition
Detected
Power Supply Fan is faulty or not connected
Action
1. Check for a clogged fan.
2. Check Power Supply Fan connector
connection.
3. Replace Power Supply Fan.
4. Replace Printer Controller PCB.
29: Wipe Valve Error
29
20
Condition
Detected
Wipe Valve position error
Action
1. Check Wipe Valve Sensor connector
connection.
2. Check Valve Motor connector connection.
3. Replace Wipe Valve Sensor.
4. Replace Valve Motor.
5. Replace Valve Unit.
29
21
Condition
Detected
Wipe Valve position error
Action
1. Check Valve Motor connector connection.
2. Replace Valve Motor.