TransAct Printrex 980 - Page 214

Appendix B: Frequently Asked Questions
Page 204 100-11672 - Rev D
Code
Detail Code
Item
Description
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
03
Condition
Detected
Unused interrupt handling in print processing
Unit
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
04
Condition
Detected
Could not get interrupt resources
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
05
Condition
Detected
Could not get OS resources in print processing
Unit
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
06
Condition
Detected
Invalid interruption occurring in print processing
Unit
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
07
Condition
Detected
Invalid paper detection interruption handling
during print processing
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
08
Condition
Detected
Invalid processing in ASIC print processing Unit
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
09
Condition
Detected
Invalid response processing in Print Module
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and