15.Waveform Reading
96
15-1-5. Simple Call-up of the Waveform Reading Screen
The Waveform Reading screen can directly be called up with the key on the Hold
Point Display screen.
15-1-6. Display of Hold Point in the Read Waveform
Hold Point in the read waveform can be listed with the key on the Waveform
Reading screen.
15-2. Rejected Waveform Reading
Rejected Waveforms having failed in sampling are read by this operation. Up to four
waveforms can be stored.
Setting item: Cancel / Last Wave / 2nd Last Wave / 3rd Last Wave / 4 Oldest Wave
1. Select the waveform to be read, and press the key.
Go to the Rejected Waveform Reading screen.
(When there is no Rejected Waveform, the buzzer beeps.)
2. The operating method of the screen is the same as that of the Waveform Reading
screen.
MODE → Read Wave → Read NG Wave
To Next Page
Loading...