17.System-related Settings and Operations
128
17-4. Contrast
Set the contrast of the color liquid crystal display.
Setting item: UP / DOWN
Up: ....................The LDC becomes brighter in stages.
Down: ................The LDC becomes darker in stages.
17-5. All Parameters Clear
All set values (SRAM items only) are reset to their initial values.
For the initial values, see "24. Setting Items list" P161.
The operation is executed by pressing the key.
The operation can be executed only when the "Set Value Protection" setting is "All
Unprotect".
17-6. Self-test
The operating conditions of the F395 body are tested by this function.
If there is any problem, ask your dealer for repair.
The operation is executed by pressing the key.
・ If the backlight ON signal is kept on, the backlight will not go out.
・ When "0" is set, if the screen is not touched and sampling is not
executed for 2 hours, the backlight will go out. (The backlight is lit by
touching the touch panel, executing sampling, or turning on the
backlight ON signal.)
MODE → System2 → All Param. CLR
MODE → System2 → Self Test
To Next Page
Loading...