Unipulse f395 - Sample Hold

10.Multi-Hold Mode
49
10-3-1. Sample Hold
A point is held when the T/H signal is turned on
t1: Delay time between the instant when the T/H signal is input and the instant when the
indicated value is held.
Ts+0.8msec (max.)
t2: Delay time between the instant when the T/H signal is cancelled and the instant when
the indicated value returns to tracking.
Ts+0.8msec (max.)
t2t1
t
＋
T/H
COMPLETE
OFF
ON
OFF
ON
OFF
ON
Sensor input value
Indicated value
Hold period
Determination
High/Low
Limit
Output
Judgment