16.Code Setting
122
16-3-1. Items to be Displayed on the Graph of the Present Value and
Input Value
Items to be displayed on the graph of the present value and input value are shown.
Green line: Indicates the present value.
Red line: Indicates the input value.
The following items are applicable:
High Limit / HI-HI Limit / Low Limit / LO-LO Limit / Displacement High Limit /
Displacement Low Limit / Displacement Hold High Limit / Displacement Hold Low
Limit / Waveform Start Level / Waveform Termination Level / Hold Start Level /
Hold Detect Time / Inhibit Timer / Code Up Point
・ For Hold Detect Time / Inhibit Timer, the time-converted value of the
set value is displayed at the lower right.
・ For Code Up Point, the time-converted value of the set value is
displayed at the lower right in the Multi-Hold mode.
To Next Page
Loading...