8.Hold Point Display Screen
42
8. Hold Point Display Screen
Up to 9 results of measurement can be confirmed on the hold point display screen. Since
the display is always updated every time a measurement is made in order to display the
latest results of measurement, use the display by switching from the graph screen
according to the measuring conditions.
1 .......... If any result is an error, the whole column becomes red.
2 .......... If there is no result, "----" is displayed
3 .......... The results of comparison are displayed. (H, L, HH, or LL is displayed. Blank
when OK.)
21
Press the key.
3
［Hold Point Display Screen］
［Graph Screen］
Since the display is always updated, read specific results of
measurement in detail from the Waveform Reading screen. (See "15-1.
Waveform Reading" P92.) (The Waveform Reading screen is not
updated to the latest results of measurement.)
To Next Page
Loading...