1.Outline of the F395
6
1-8. Standard Interface
Status, set values, indicated values, waveform data, etc., can be sent to your PC through
the RS-232C serial interface. Set values and commands can also be sent from the PC to
F395. (See "18-2. RS-232C Interface" P133.)
Also, external equipment such as a printer and large display manufactured by us can be
used by using the SI/F 2-wire serial interface. (See "18-1. SI/F 2-wire Serial Interface"
P132.)
1-9. Waveform Reading
Measured values at sampling points for the latest sampled waveform and NG-
measurement waveforms (rejected waveform reading: four waveforms at maximum) can
be read.
(See "15-1. Waveform Reading" P92, "15-2. Rejected Waveform Reading" P96, and "15-
3. Rejected Waveform Clear" P97.)
To Next Page
Loading...