18.Interface
147
18-4-10. Commands
18-4-11. Reading Hold Data
On the Latest Sampled Waveform and Last ~ 4th Last Rejected Waveforms, all Hold
Points (up to 9 points of X/Y-axis data) can be read. See "1." and "2.".
Also, on the Latest Sampled Waveform, the data of each hold point can be read. See "3.".
Hold type: 0 ~ 19=Hold, 20=Pulse hold / Hysteresis 2 pulse 1, 21=Pulse 2,
22=Pulse 3, 30=Waveform Comparison NG point
SY:
SX:
SUM 1 ~ 4 : The last two bytes of the total of all ASCII data from RHG to SX of 9:
expressed as a 4-digit hexadecimal number.
1. All reading: Latest sampled waveform
ＣＡ
Host
F395
ＣＢ
Host
F395
(Y-axis)
No response is made to the commands.
Terminator
Terminator
Digital zero
Digital zero reset
(Y-axis)
０１０LL LO OK HI HH
B7 B6 B5 B4 B3 B2 B1 B0
０１００ LO OK HI０
X-axis status
Y-axis status
F395
RHG1 :
××±０００
.
０±００００
.
０
SY SX
2:
××±０００
.
０±００００
.
０
SY SX
3:
××±０００
.
０±００００
.
０
SY SX
9:
××±０００
.
０±００００
.
０
SY SX
SUM 1 ~ 4
Terminator
・・・
Host
RHGA
Terminator
Hold type Y-axis data X-axis data Status
To Next Page
Loading...