Unipulse f395 - Each Setting Item; Channel Number Selection

16.Code Setting
103
16-2. Each Setting Item
16-2-1. Channel Number Selection
Set channel number(s) in Code Setting. Up to 32 channels can be set in Code Setting,
which can be switched and controlled as desired externally.
Setting range: 0 ~ 32
Example: Setting the operation ch to 5ch
1. Press five times.
2. Determine by pressing .
32 channels from 0ch to 31ch can be set.
For setting the same value to 32 channels at the same time, set at 32ch. The same set
value is entered for all 0ch to 31ch every time each item of Code Setting is set.
MODE → Code Set