2.Name and Function of Each Part
10
ⅱ Hold status display
ⅲ High and low limits / NOV RAM writing display
ⅳ ch display
7. Set operation mode display
Displays the currently set Operation Mode.
8. Control signal display
Displays the T/H and H/M input status. (See "15-8. Control Signal Display" P99)
9. Display of high and low limit set values
Displays the High and Low Limit Set Values of the ch (operation ch) set by external input in the
Multi-Hold mode. (See "16-2-7. High Limit / Low Limit / HI-HI/LO-LO Mode / HI-HI Limit /
LO-LO Limit" P109), and displays the comparison waveform of the currently set opera-
tion ch in the Waveform Comparison / Waveform and Displacement Comparison mode.
(See "13-1. Function" P68.)
Operation mode Status display
Multi-Hold
Hysteresis
Hysteresis 2
Waveform Comparison
Waveform and
Displacement Comparison
WAIT : In tracking display
DETECT : In hold detection period.
HOLD : In data hold.
NOV : In NOV RAM writing.
HH : Indicated value > HI-HI Limit set value
HI : Indicated value > High Limit set value
OK : Neither of the High and Low Limits is exceeded.
LO : Indicated value < Low Limit set value
LL : Indicated value < LO-LO Limit set value)
Priority : NOV = HH = LL > HI = LO > OK
HI LO
HH HL
OK
or
HOK
or
…
…
Hold judgment
Waveform
comparison
judgment
Displays the ch set by external input (operation ch).
To Next Page
Loading...