Universal Robots UR5

To Next Page

To Previous Page

Preface

Congratulations on the purchase of your new Universal Robot, UR5.

The robot can be programmed to move a tool, and communicate with other ma-

chines using electrical signals. It is an arm composed of extruded aluminum tubes

and joints. Using our patented programming interface, PolyScope, it is easy to pro-

gram the robot to move the tool along a desired trajectory.

What Do the Boxes Contain

When you order a complete robot, you receive two boxes. One contains the robot

arm and the following items are included in the other one:

• Control box with teach pendant;

• Mounting bracket for the control box;

• Mounting bracket for the teach pendant;

• Key for opening the control box;

• Mains cable compatible with your region;

• EUROMAP 67 cable;

• Stylus pen with laser;

• UR production test certiﬁcate;

• This manual.

Version 3.4.5

ix UR5/CB3

Other manuals for Universal Robots UR5