Universal Robots UR5

15.2 Update Robot
15.2 Update Robot
Software updates can be installed from USB flash memory. Insert an USB memory
stick and click Search to list its contents. To perform an update, select a file, click
Update, and follow the on-screen instructions.
WARNING:
Always check your programs after a software upgrade. The up-
grade might change trajectories in your program. The updated
software specifications can be found by pushing the “?” button lo-
cated at the top right corner of the GUI. Hardware specifications
remain the same and can be found in the original manual.
Version 3.4.5
Copyright © 2009–2017 by Universal Robots A/S. All rights reserved.
II-107 CB3